From Subenews
Jump to: navigation, search

Eggenfellner Gen3 Gearbox

Manufacturer's Listed Specs

Gen3 Howto Guides

   (Note: Add the following sentence at the end of step 12 in the Gearbox Alignment Instructions:
   "Tighten all bell housing bolts to approx. 250 lb.-in. then recheck alignment."
   This step will insure that everything stays put while you take your time applying Loctite and installing 
   bolts for the last time.)


    If you make this tool, please use plus/minus .001" as a tolerance between all of the center distances.


FAQs (Frequently Asked Questions)